学术研究
~~~高浓度EGFP抗体~~~NQBB血清+生长因子--效果奇佳~~~USCN ELISA Kit~~~Creative Biolabs抗体~~~治疗用抗体~~~核酸萃取仪~~~各式仪器~~~Biofil各式耗材~~~
首页 经销厂牌 Jet Biofil Protein G Resin and Column-NEW

Protein G Resin and Column-NEW

相关连结 Click here






















 

Cat. No.

Product Description

PGC000001

Protein G Column1mL settled resinmanually operated

PGC000005

Protein G Column5mL settled resinmanually operated

PGC100001

Protein G Column1mL settled resinattached to AKTA

PGC100005

Protein G Column5mL settled resinattached to AKTA

 

Cat. No.

Product Description 

PGC001005

Protein G Resin5mL

PGC001025

Protein G Resin25mL

PGC001100

Protein G Resin100mL

 

Product Specifications And Details

Introduction

Protein G is bacterial protein and can bind specifically to Fc regions of many mammalian immunoglobulins. For this reason, Protein G is conjugated onto a purification matrix called Sepharose to purify immunoglobulins, also called as antibodies, and immunoglobulin subtypes from serum, hybridoma ascites fluids, tissue culture supernatants and other biological fluids.

Protein G is expressed in E coli and the resulting recombinant protein G can be covalently conjugated onto the matrix (Sepharose 4FF). It has been well-documented that the Fc binding characteristics of naturally produced Protein G is identical to their recombinant counterparts.

The final product, the recombinant Protein G-Sepharose 4FF Premade column, is stored at 20% Ethanol stably.

Specifications

rec-Protein G/Sepharose ratio 2.7~3.2mg rec-Protein G/ml Sepharose 4FF

Binding capacity 18-45mg human IgG / ml Purification matrix  

                       18-42mg rabbit IgG/ml Purification matrix

                      4.5-15mg mouse serum/ml Purification matrix

                      5-15mg mouse ascites/ml Purification matrix

rec-Protein G molecular weight ~24.0 KDa

Albumin binding sites/ molecule rec-protein None

 Binding Characteristics of Immunoglobulins to Protein G

Species

Protein G

Species

Protein G

Species

Protein G

Human IgG1

++++

Mouse IgG2b

+++

Hamster Ig

++

Human IgG2

++++

Mouse IgG3

+++

Guinea-pig Ig

++

Human IgG3

++++

Mouse IgM

-

Cattle Ig

++++

Human IgG4

++++

Rat IgG1

+

Horse

++++

Human IgA

-

Rat IgG2a

++++

Cow

++++

Human n IgD

-

Rat IgG2b

++

Pig

+++

Human IgE

-

Rat IgG2c

++

Sheep

++

Human IgM

-

Rat IgM

-

Goat

++

Mouse IgG1

++++

Rabbit Ig

+++

 

 

Mouse IgG2a

++++

Chicken Ig

+

 

 

 User Information

• The flow rate:  The column flow rate is an important parameter for purification and should be smoothly controlled. Slower flow rate can significantly increase the purification product.

• Binding Capacity:  For serum samples, the total IgG concentration is 10-15mg/mL. For tissue culture supernatant or hybridoma clones, the total IgG concentration varies considerably from 2mg/ml to 18mg/ml. For samples with low IgG concentration, repeated loading of sample can increase the purification product. 

Procedure for Antibody Purification

A. Additional Materials Required

• PBS Buffer: 0.1M sodium phosphate, 0.15M Sodium Chloride, pH 7.2 

• Elution Buffer: IgG Elution Buffer: 0.1M glycine, pH 2.7

• Neutralization Buffer: 1M Tris, (pH 9.0) 

B. Immunoglobulin Purification Procedure

1. Equilibrate all reagents to room temperature before use.

2. Pack the column with resin slurry or use premade column.

3. Equilibrate column by adding the PBS buffer with a volume of 10 times related to column resin volume, and allowing the solution to drain through.

4. For sample with high concentration of Immunoglobulin, dilute sample at least 1:1 with Binding Buffer.

Note: If lipoprotein precipitation is evident in the sample of purification, centrifuge the diluted sample at 10,000 × for 20 minutes and apply the supernatant to the equilibrated column.

5. Apply diluted sample to the column and allow it to flow completely into the resin. Do not allow the resin bed to run dry.

6. Wash the column with binding buffer, with a volume of 10 times related to column resin volume.

7. Elute antibodies with elution buffer and collect fractions. Immediately adjust eluted fractions to physiologic pH by adding 1/10 of the neutralization buffer to elute. Monitor the elution by measuring the absorbance at 280nm or by protein assay such as BCA Protein Assay Kit.

8. Pool the eluted antibody fractions that have the highest absorbance.

9. Regenerate column by washing with elution buffer. Columns can be regenerated with PBS, with a volume of 10 times related to column resin volume. Repeated tests indicate that no significant loss of binding capacities found after 10 times of repeated usage.

10. For storage, wash column with water containing 0.02% sodium azide. Store column upright at 4°C. 

Troubleshooting

Problem

Possible Cause

Solution

Slow Flow Rate

The resin pores were blocked with air bubbles existing in buffers or sample.

Remove air bubbles in the resin and buffer by using degassing buffers.

No specific antibody of interest

Low concentration of the antibody of interest.

Use serum-free medium for cell supernatant samples.

No protein detected

Sample was devoid of antibody species or subclass that binds to resin.

Check binding characteristics table to check if the immunoglobulins species or subclasses are covered by the resin of usage.

Antibody degraded

Antibody was sensitive to elution buffer and can be degraded.

Check if neutralization buffer was used.

 


订阅商品讯息订阅商品讯息 Copyright © 2016 GenLabBiotech Co.,Ltd. All rights reserved.
Powered by www.url.com.tw